# MAB-BASE-NATURAL
8 OZ Pack $9.95

Mold A Bait™ Natural base material.

This is the Natural raw material to use in making your fish bait and lures. It can be used to make your fish bait and lures with or without adding colors or other items to your lures and baits. With the simple addition of pure water in measured amounts and cooking in a microwave for 30 seconds or so you can cast your own custom baits and lures. Mold A Bait™ Natural has a slight beefy kind of odor that will attract fish when they are within range of the bait scent. With the use of our Mold A Bait™ molds you can cast many designs for the type of fish you want to catch, or you can cast it into a Mold A Bait™ loaf mold (see below) and cut to size as you need it.

Comes packaged with directions on how to mix and cast it in our molds. Nothing could be as simple or as fun as making your own lures and baits. This package makes a whole lot of bait and lures!

In it's dry state, this product will last indefinitely.
Once made into fishing bait, this product must be kept cool until it hits the water. For storage, you can freeze it for your next fishing trip or for re-melting to make new fishing bait later.
You can also let this product dry out after castings are made to become like a hard plastic type of lure. After drying, you do not need to keep cool, but it will eventually absorb water if left in the water for extended times like over night.

Not for human consumption. Non Toxic.

CLICK HERE TO GO DIRECTLY TO THIS PRODUCTS PURCHASE PAGE

 

# MAB-BASE-CORN
8 OZ Pack $9.95

Mold A Bait™ Corn Flavor base material.

This is our corn flavor formula that is perfect for trout fishing or carp fishing. Many kinds of fish are attracted to grain type baits, and our Corn Flavor is great as a molded bait. Very small pieces can be cut from a cast loaf for putting on trout hooks. As with our other Mold A Bait™ casting base, you can make up to 2 pounds of bait, so it is very economical to use.

Please note that this bait has a natural yellow color so adding blue or red coloring will in effect make greens and orange colors.

In it's dry state, this product will last indefinitely.
Once made into fishing bait, this product must be kept cool until it hits the water. For storage, you can freeze it for your next fishing trip or for re-melting to make new fishing bait later.
You can also let this product dry out after castings are made to become like a hard plastic type of lure. After drying, you do not need to keep cool, but it will eventually absorb water if left in the water for extended times like over night.

Not for human consumption. Non Toxic.

CLICK HERE TO GO DIRECTLY TO THIS PRODUCTS PURCHASE PAGE

# MAB-BASE-WHEAT
8 OZ Pack $9.95

Mold A Bait™ Wheat Flavor base material.

Our Wheat flavor Mold A Bait™ base is more opaque than the Natural making it look more like a solid living thing. The natural wheat flavor that is put off by this bait in the water will attract fish that like grain type foods. Catfish and many others will be attracted to this bait too, so it can be used as an alternative to the Corn Flavor bait we have when you want to use a grain type base but want to make your colors more vibrant and not be controlled by the yellow color of the Corn Flavor bait.

In it's dry state, this product will last indefinitely.
Once made into fishing bait, this product must be kept cool until it hits the water. For storage, you can freeze it for your next fishing trip or for re-melting to make new fishing bait later.
You can also let this product dry out after castings are made to become like a hard plastic type of lure. After drying, you do not need to keep cool, but it will eventually absorb water if left in the water for extended times like over night.

Not for human consumption. Non Toxic.

CLICK HERE TO GO DIRECTLY TO THIS PRODUCTS PURCHASE PAGE

# MAB-BASE-BLOOD
8 OZ Pack $9.95

A new addition to our family of Mold A Bait™ casting base products!

There is no question that blood type baits are a great attraction to fish. It has been an old standby for many years for serious fisherman.

Now you can mold our Blood Base into lures and loafs to your hearts content. Our Blood Base is already naturally very dark red in color, so it would not benefit to use colors in this bait, but the natural coloration is perfect anyway as the blood is slowly released along with our baits natural flavors, it will be a sure attractant to your favorite fish. As with our other Mold A Bait™ casting bases, the Blood Base forms a rubber like casting that is great for emulating living baits.

In it's dry state, this product will last indefinitely.
Once made into fishing bait, this product must be kept cool until it hits the water. For storage, you can freeze it for your next fishing trip or for re-melting to make new fishing bait later.
You can also let this product dry out after castings are made to become like a hard plastic type of lure. After drying, you do not need to keep cool, but it will eventually absorb water if left in the water for extended times like over night.

Not for human consumption. Non Toxic.

CLICK HERE TO GO DIRECTLY TO THIS PRODUCTS PURCHASE PAGE

Mold A Bait™ Coloring Kits

With only 3 colors you can create all of the colors on a color wheel, and many more in between as well as tints. Red, Blue, and Yellow, are the primary colors that come in our color kits. These are one ounce bottles of color and will tint several pounds of bait. Since it only takes a few drops of color per batch, it will last a long time. Click Here to learn more about our colors for use in Mold A Bait™

# MAB-M01
$6.95 each

Mold A Bait™ Small Frog Lure Mold

There are 8 Small Frog Lure cavities on this mold so you can make 8 frogs at a time. Each small frog is approximately 2&1/2" long from tip of nose to end of rear flippers. And total width of frog at flippers end of toes is 2" wide with the general body being an average of about 3/4" wide and 3/8" inch thick.

The thin feet sections of this frog are designed to be extra limber and also shaped to make him (swim) in a more natural way. You can cast hooks right into his belly or put a hook through him or even design him so treble hooks hang down from his belly. You can color him however you like and there are suggestions on our web site for making multicolored lures.

Keep in mind that this little fellow can also be cast with flavors to bring the fish to him as well. Fish can sense flavors and scents in the water far higher than we can. Frogs are a natural food for some fishes, and with this one broadcasting where he is and being very close to the real thing for being food, it is the perfect lure! You might want to add a swivel to the cast Small Frog Lure to let him swim without twisting your line up.

CLICK HERE TO GO DIRECTLY TO THIS PRODUCTS PURCHASE PAGE

 

# MAB-M02
$6.95 each

Mold A Bait™ Flipper Lure Mold

There are 7 Flipper Lure cavities on this mold so you can make 7 parts at a time. You can simply cast them and put them on your hook when you are fishing, or you can mold your hooks right into the Flipper Lure baits.

Each Flipper Lure is made to be like a natural surface texture (not machine perfect) and measures approximately 1&3/4" long by 1&1/4" wide by about 3/16" thick. Can also be combined with a swivel to become a spinner type lure.

CLICK HERE TO GO DIRECTLY TO THIS PRODUCTS PURCHASE PAGE

# MAB-M03
$6.95 each

Mold A Bait™ Wobble Swimmer Mold

There are 8 Wobble Swimmer cavities on this mold so you can make 8 parts at a time. This one is a great mold for putting spots or stripes in the mold with a small paint brush using a dark colored Mold A Bait™ mix and let it jell before casting the body color. Since Mold A Bait™ bonds perfectly to itself, the other colors will be a part of the lure. You can also cut pieces out of the lure or add other things like hairs or feathers to make it even more attractive.

The Wobble Swimmer Lure is about 2&1/8" long by 1&1/8" wide by 1/8" thick. It has a natural formed surface and being so thin will wobble in the water like a natural swimmer. You can add small hooks to casting or hook it when you are ready to fish. You can add more than one to a hook to create even more options and movement.

CLICK HERE TO GO DIRECTLY TO THIS PRODUCTS PURCHASE PAGE

 

# MAB-M04
$6.95 each

Mold A Bait™ Torpedo Striker Jitterbug Mold

This Torpedo Striker Jitterbug mold has 7 cavities so you can make 7 parts at a time. The Torpedo Striker Jitterbugs are approximately 2&1/8" long by 7/8" wide by 1/2" thick at the largest dimensions. It has eyes molded into it but you can also cut the nose off to create even more water action. Don't forget, there is never any waste with Mold A Bait™ as you can save all your cuttings and re-melt it again for use in more fishing jigs.

This little puppy is a fantastic jig makers dream. You can add colors and spots or other things to this casting to your hearts content. Since the Mold A Bait™ castings are more lifelike and taste and feel like real food, this Jitterbug type bait is a sure fire winner for catching those hard to catch fish. Since they also have the added appeal of actually smelling and tasting like real live bait, they will attract a lot more attention than hard lures do.

It is very easy to set up treble hooks and other hook attachments to hang from the belly of this lure too. If it is bottom weighted with hooks, it will tend to want to dive when you pull it in the water due to it's shape. You can also add pieces of castings of other colored Mold A Bait™ to this lure as you cast it to create even more options. There is just no end to what you might want to design with this mold as a basic building block for your custom fishing lures.

CLICK HERE TO GO DIRECTLY TO THIS PRODUCTS PURCHASE PAGE

 

# MAB-M05
$6.95 each

Mold A Bait™ Night Crawler Mold

The Night Crawler mold has 6 cavities so you can make 6 worm lures at a time. They are about 5&1/4" long by 1/2" wide by 1/4" thick.

There just isn't anything better than a real Night Crawler except Mold A Bait™. Since Mold A Bait™ can be colored any way you like, and can attract fish for a much longer distance because of leaving a trail of natural flavors and scents in the water, along with natural movement and feel of live bait in the water, it is the ideal fishing material, especially when formed to look like a real live Night Crawler.

When you want to change the bait you are using to fish for small mouth fish, simply cut the Mold A Bait™ worms into small pieces and add them to your hooks, no need to carry all kinds of bait, as just the one will do everything you want.

When you get back from your fishing trip, simply store it away in the freezer for future making of new bait for the next fishing trip.

CLICK HERE TO GO DIRECTLY TO THIS PRODUCTS PURCHASE PAGE

# MAB-M06
$6.95 each

Mold A Bait™ Crickets and Bugs Mold

The Crickets and Bugs mold has 8 cricket type bugs and 8 small spinner type cavities on the same mold sheet. That makes 16 small castings you can do with one mold sheet.

Crickets (bugs) are about 1&1/2" long by 3/4" wide at widest part and about 1/4" thick. Very realistic for size and bug look. The spinner type cavities are about 1&1/4" long by 3/4" wide by about 1/8" thick.

Mixing all Mold A Bait™ colors together make black, so you can easily color the crickets to look very realistic. You can also color them a shade of green or yellow or leave them the natural Mold A Bait™ color to emulate different kinds of insects. You can mold hooks right into them or push a hook through them as you want. More than one can be put on a hook too depending on how large of hook and the type of fish you are wanting to catch. You can use the spinner type castings by themselves or in combo with other molded parts as you want. Being creative with Mold A Bait™ is a breeze when you have molds and unlimited amounts of times you can re-melt it to try something new if it doesn't turn out quite like you wanted it to do.

CLICK HERE TO GO DIRECTLY TO THIS PRODUCTS PURCHASE PAGE

 

# MAB-M07
$6.95 each

Mold A Bait™ Twin Tail Grub Mold

There are 7 Twin Tail Grub cavities on this mold sheet. You can make 7 Twin Tail Grubs at a time. The Twin Tail Grub fishing lure is about 3" long by 1&3/4" wide at the tail by 1/4" thick at the body.

The twin tails on this grub cause it to (swim) in the water making for a very fish attracting lure. You can mold your hooks right into the molded bait, or hook them in the field, the choice is yours. This Twin Tail Grub will work with any of our colors depending on how you want to attract different fish. You can also add spots to the lure in the mold with darker Mold A Bait™ colors and let them set up before casting in the lighter colors making for even more realistic lures and baits.

CLICK HERE TO GO DIRECTLY TO THIS PRODUCTS PURCHASE PAGE

 

# MAB-M08
$6.95 each

Mold A Bait™ Fan Tail Lure Mold

There are 8 Fan Tail Lure Cavities in this mold sheet. You can make 8 Fan Tail Lures at a time. The approximate measurements of the Fan Tail Lure are 2&1/8" long by 1&3/4" wide at the tail by 1/4" thick at the head.

The tail is thin and flexible and can be cut with scissors to make several strands that can wave in the water if you want. This lure can also be cast and then used to cast a tail into other Mold A Bait™ lures as well. It is easy to combine more than one cast part if you use a little planning and a little imagination on what you want to try for a lure. If it doesn't work, just re-melt them into more castings later.

CLICK HERE TO GO DIRECTLY TO THIS PRODUCTS PURCHASE PAGE

 

# MAB-M09
$6.95 each

Mold A Bait™ Tadpole Lure Mold

There are 8 Tadpole Lure cavities in this mold sheet. You can make 8 Tadpole Lures at a time. The tadpole has a curved tail so measurements on this piece are taken from the length from nose to curve of tail, not to end of tail. Approximate size is 2&1/2" long by 3/4" wide at the body and about 3/8" thick.

The curved tail causes this Tadpole Lure to swim in a more natural manner as it is pulled along. Nothing is more natural bait in the water than a tadpole, since they are indigenous to anyplace where frogs exist, and fish know what a morsel they are to eat.

You can color this tadpole lure to closely match the real thing very easily with our Mold A Bait™ colors. Put hooks into them and even legs and feet cut from other molds as you mold them to create the perfect bait to catch that big fish!

CLICK HERE TO GO DIRECTLY TO THIS PRODUCTS PURCHASE PAGE

 

# MAB-M010
$6.95 each

Mold A Bait™ Wide Tail Swimmer Mold

There are 8 Wide Tail Swimmers on this mold sheet. You can make 8 Wide Tail Swimmers at time. The Wide Tail Swimmer measures on the average about 2&1/4" long by 1&3/4" wide at end of tail and about 3/16" thick.

The design of this lure is made to cause some pretty erratic swimming. It can also be cut or feathered down the tail to further the action on this lure. You can also use this lure in combination with more than one piece, or add other pieces from your molded parts to it so you can create an endless variety of baits and lures of your own designs.

CLICK HERE TO GO DIRECTLY TO THIS PRODUCTS PURCHASE PAGE

 

Mold A Bait™ Dome Top Loaf Mold

This mold is a 4 cavity mold with two of the cavities being about 2&3/8" wide by 3&3/8" long by about 1" deep at top of dome. The other two cavities are about 2&3/8" square and about 1" deep at top of dome.

This is a great way to store your extra Mold A Bait™ material after you make it up, but it can also be used to create loafs to cut slices from. You can pour in layers of different colors and let them cool to room temperature and gel before adding the next color. After you slice it, you will get something similar to a bacon strip that can be used for fishing baits or as cut parts to add to your other lures.

CLICK HERE TO GO DIRECTLY TO THIS PRODUCTS PURCHASE PAGE

# MAB-M011
$6.95 each